Solar Panels Adelaide: Solar Panels For Adelaide Homes – How to Choose the Right Solar Panels For Your Rooftop

Adelaide homes can save money on electricity bills with a rooftop solar power system. A 6.6kW north-facing system can generate around 28 kWh on average daily throughout the year, enough to reduce household power consumption by up to 40%.

Electricity retailers determine the feed-in tariff offered, and customers are advised to choose a suitable plan before investing in a solar panel installation. The best way to compare electricity prices is by using an online tool. For quality solar panels Adelaide, check this out.

Photovoltaic Cells

solar panels AdelaideThe heart of any solar energy system is its photovoltaic cells. A typical residential solar PV system contains 60 or more photovoltaic cells that work together to create electricity.

A layer of semiconductor material on a solar panel absorbs the light that hits it, causing electrons to break free of their atomic bonds. Those electrons flow around the cell, creating positive charge carriers known as holes.

The negative side of the hole is connected to a wire or metal strip on the solar cell, while the positive side is attached to a battery that stores energy for later use. The cell generates direct current (DC) electricity. That electricity can be used to power devices that use DC power, or it can be stored in a battery for use at night.


A solar inverter is an essential component of any solar energy system. It converts the DC power generated by your solar panels into AC power that your home can use. It also selects the most productive operating voltage for your panels automatically. For quality solar panels Adelaide, check this out.

Solar panels produce electricity in the form of DC, whereas most homes are wired to use AC power. An inverter is needed to convert this energy into something your home’s electrical wiring can use.

The optimum angle of your roof should be North, but this isn’t always practical as the sun rises in the east and sets in the west. Luckily, solar professionals can find a solution for you and your roof that maximises electricity production, even if it isn’t an accurate north-facing installation.

Solar panels that face east or west will still produce energy, but the overall efficiency is lower than with a north-facing roof. Talk to your solar installer about the best solution for your roof, considering your daily routine and consumption patterns.

Roof Orientation

Panels that face east tend to produce around 12% less electricity than north-facing ones. However, they can be beneficial if you use a lot of electricity in the morning, particularly during winter, when you may want to heat your house.

Panels that face west are similar to those facing east in their energy production. They also reach their maximum output during the afternoon, which can be helpful if you’re likely to consume a large amount of electricity from the grid between 2 pm and 8 pm.


If your solar panels are oriented correctly, they will generate power proportional to the sunlight they receive daily. However, the sun’s position across the sky at any given time changes throughout the year. It’s essential to look at the equivalent peak sun hours for your location and the time of year when you plan to install your system.

It is recommended that your solar panels are tilted to 30 degrees and facing true North. It will maximise their energy production during the summer months.

When selecting solar panels, it’s important to take into account the local climate and your electricity consumption habits. For example, you’ll likely need a larger solar power system if you use a lot of electricity during the daytime. In contrast, if you’re a light energy user, then you may be able to get away with a smaller system.

A good place to start is by researching different solar panel manufacturers. Look at online

Gibson Guitar: Gibson Guitar Setup

A good Gibson guitar setup starts with checking the neck. Look at the bottom of the strings at the 8th fret. You have neck relief if you see a slight gap between the line and the top of the fuss.

You will also want to check the saddle height. A saddle that is too low will make the strings harder to bend.


Gibson guitar setupThe neck of a guitar plays a vital role in an instrument’s overall feel and playability. Its shape and dimensions affect the hand’s grip, wrist angle and thumb position, ultimately impacting dexterity and comfort during extended playing sessions. When shopping for a Gibson guitar, consider the neck profile best suits your style and preferences. Seeking advice from experienced guitarists and professionals can be a great way to make an informed decision.

The slim taper neck is one of the most popular profiles available on Gibson guitars. This design is typically thinner on the bass side and thicker on the treble side to accommodate the natural shape of the hand and reduce hand fatigue during long sessions. The rounded neck is another option that offers a more traditional feel. This neck is chunkier than the slim taper and is better suited for players with larger hands who may find the slimmer profile uncomfortable.

If your guitar has a truss rod, remove it and keep the screws somewhere safe. To check the truss rod’s action, fret the low E string at the 22nd fret and measure the height of the string from its underside to the point on the pickup closest to it. The distance for the bridge and neck pickup should be equal. After checking the truss rod’s action, tune the guitar to pitch and play through it to verify that there is no fret buzzing.


The bridge of a Gibson guitar helps to hold the strings down and can affect the tone. It can sound warmer and brighter by changing the tone knob. A higher tone setting increases the number of treble frequencies, which makes the guitar sound more colourful and more generous at the same time. It does not affect the bass frequencies, which makes the guitar sound deeper.

Many types of bridges can be installed in a Gibson guitar. Some are a fixed bridge with no tailpiece, and others have a whammy bar that can be moved up and down the guitar. Some are a Tune-o-Matic style, while others are wrap-around designs. Tune-o-Matic style bridges allow fast individual string height “action” adjustments and intonation. For more information about the Gibson guitar setup, click here.

Most Gibson guitars have a Schaller wide-travel Tune-o-Matic. This bridge was first used on the Les Paul Recording model in 1971 and was the standard bridge for all solid body and thinline Gibson guitars until the end of the seventies. It was also the original bridge on the ES-325TD and L5S, SG Custom, SG Special, Marauder and S-1 models.

The Tune-o-Matic bridge has six individual saddles for each string. Each of these saddles has a screw that can be slid backwards or forwards to adjust the string’s intonation. This system is straightforward and allows for a quick and accurate intonation adjustment. If a line has been changed as far forward or backwards as it can go, but the intonation is still off, it may be necessary to remove the saddle, remove the screw, and flip it over to the other side so it is positioned like it was before.


A guitar’s pickups are a crucial element in shaping its tone. Gibson has pioneered many of the industry’s most popular styles, including P-90s and humbuckers. A humbucker is two coils wired in opposite directions, cancelling the magnetic field between them to eliminate hum and buzz and provide a hotter sound with more midrange clarity than a single-coil pickup.

The most famous humbucker in the Gibson lineup is the Memphis Historic Spec, introduced with the Les Paul Studio model in 1957. It features a scatter wound, Alnico II magnets and a pair of stacked ‘buckers at the bridge and neck position, designed to emulate the sound of vintage PAFs. This powerful humbucker is ideal for lead and rhythm playing, and it’s wax-potted to keep feedback at bay even at high volumes.

Another notable option is the EMG Dirty Fingers, an active ceramic humbucker with an Alnico VIII bar magnet. It’s a popular choice for heavy rock and metal players and is known for its extreme output and fantastic sustain. Its noise-cancelling abilities also make it an excellent choice for recording.

If you prefer a more traditional sound, look for a P-90. These single-coil pickups feature large coils with flat ALNICO bars instead of pole pieces, providing an articulate and raunchy tone that audiophiles adore. These snazzy pickups are available in either “soapbar” or “dog ear” styles, with the latter screwing into the guitar’s single-coil cavities. Gibson has several different P-90 variants, including various models’ versatile 490R and 498T humbuckers. For more information about the Gibson guitar setup, click here.